Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — BEVEL GEAR SHAFT, HASS AND BRAKE

10 Structure, function and maintenance standard SEN00283-01 HSS operation When steering is at “neutral“ (straight travel) q When steering operation of PCCS lever is at “neutral“, left and right gears A (2) of transfer area and planet area do not rotate for HSS motor (1) is stopped. q Therefore, the number of output rotation of left and right becomes the same and the machine travels straight. q Under this condition, power from bevel gear shaft (3) is transmitted from hub (4) to ring gear (5).

Rotation direction of HSS motor PCCS lever steer- ing operation Neutral Right turn Left turn q Power transmitted to ring gear (5) is transmit- ted to carrier (8) by passing through planetary pinion (6) to planetary pinion shaft (7). PCCS lever forward/reverse switching operation Free, not specified * Neu- tral For- ward Rever se * Neu- tral For- ward Rever se q Power transmitted to carrier (8) is transmitted from brake hub (9) through hub (10) to output shaft (11). Rotation direction of HSS motor viewed from left side of machine Does not rotate Left Left Right Right Right Left *: Counter-rotation D65EX, PX, WX-15E0 11