Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — HSS PUMP

SEN00285-01 10 Structure, function and maintenance standard Operation 1. Operation of pump q Cylinder block (9) rotates together with shaft (1), and shoe (5) slides on flat surface (A). When this happens, angle (a) of center line (X) of rocker cam (4) to the axial direction of cylin- der block (9) changes. (a) is called swash plate angle. q When center line (X) of rocker cam (4) is the same as the axial direction of cylinder block (9) [swash plate angle = 0], the difference between volumes (E') and (F') inside cylinder block (9) is 0, so pump does not suck and dis- charge, and no pumping is carried out.

[The swash plate angle is not set to 0 actually, how- ever.] q Swash plate angle (a) and the pump discharge amount is in relation of proportion. q With the condition of center line (X) of rocker cam (4) has swash plate angle (a) to axial direction of cylinder block (9), flat surface (A) functions as cam against shoe (5). q In this way, piston (8) slides inside cylinder block (9), and as a result, a difference is gener- ated between volumes (E) and (F) inside cylin- der block (9). The amount of suction and discharge is equal to difference (F) – (E).

q In other words, cylinder block (9) rotates, and the volume of chamber (F) becomes smaller, so pressurized oil is discharged during this process. At the same time, the volume of chamber (E) becomes larger and the pressur- ized oil is sucked in this process. 14 D65EX, PX, WX-15E0