10 Structure, function and maintenance standard SEN00285-01 2. Control of discharge q The discharge amount is increased by the increase of capacity difference of (E) and (F) as swash plate angle (a) is increased. Swash plate angle (a) is changed by servo piston (6). q Servo piston (6) reciprocates straight accord- ing to the signal pressure of the servo valve. This straight line movement is transmitted to rocker cam (4) through rod (7), and rocker cam (4) which is supported on the cylindrical sur- face by cradle (3) rotates with sliding motion.
q The area receiving the pressure is different at the left and right sides of servo piston (6), and the receiving pressure at the small diameter piston end is always connected with the main pump discharge pressure [self pressure (PP)]. q Output pressure (PNC) of the servo valve is applied to the pressure chamber at the large diameter piston end. q The movement of servo piston (6) is controlled by the relationship of the size of the pressure at the large diameter piston end and self pres- sure (PP), and the comparative size of the ratio of the area receiving the pressure at the large diameter piston end and small diameter piston end. D65EX, PX, WX-15E0 15