Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — HYDRAULIC CYLINDER

SEN00288-00 10 Structure, function and maintenance standard Unit: mm 10 D65EX, PX, WX-15 No.

Check item Criteria Remedy 1 Clearance between piston rod and bush- ing Cylinder name Standard size Tolerance Standard clearance Clearance limit Replace bushing Shaft Hole Lift 65 –0.030 –0.104 +0.262 +0.067 0.097 – 0.366 0.666 Tilt Pitch 70 –0.025 –0.064 +0.271 +0.075 0.105 – 0.375 0.675 Ripper 70 –0.025 –0.087 +0.271 +0.075 0.105 – 0.375 0.675 2 Spherical clearance between piston rod and trunnion Lift S85 –0.2 –0.3 +0.3 0 0.2 – 0.5 1.0 Adjust shim or replace Spherical clearance between piston rod and bracket Tilt Pitch S90 (Shaft) S91 (Hole) –0.1 –0.3 +1.0 0 0.2 – 0.5 2.0 Clearance between piston rod support shaft and bushing Ripper 75 –0.030 –0.076 +0.174 +0.100 0.130 – 0.250 1.0 Replace bushing 3 Clearance between cylinder boss and bushing Lift 55 –0.100 –0.174 +0.116 0 0.100 – 0.290 1.0 Clearance between cylinder bottom sup- port shaft and bush- ing Tilt Pitch 50 –0.200 –0.400 +0.142 +0.080 0.280 – 0.542 1.0 Ripper 75 –0.030 –0.076 +0.174 +0.100 0.130 – 0.250 1.0 4 Tightening torque of cylinder head Lift 735 ± 74.0 Nm {75.0 ± 7.5 kgm} Retighten Tightening torque of cylinder head mounting bolt Tilt Pitch 162 ± 14.7 Nm {16.5 ± 1.5 kgm} Ripper 162 ± 14.7 Nm {16.5 ± 1.5 kgm} 5 Tightening torque of cylinder piston clamping nut Lift 1.08 ± 0.11 kNm {110 ± 11.0 kgm} (Width across flats:

50 mm) Tilt Pitch 3.97 ± 0.40 kNm {405 ± 40.5 kgm} (Width across flats: 80 mm) Ripper 3.97 ± 0.40 kNm {405 ± 40.5 kgm} (Width across flats: 80 mm)