10 Structure, function and maintenance standard SEN00288-00 Piston valve 1 (lift cylinder) Outline q The piston valve is installed to the piston of the lift cylinder. q When the piston rod is at the stroke end, oil from the pump is released to the port on the opposite side to lower the oil pressure applied to the piston. Oil is also released to the port on the opposite side before the piston rod reaches the stroke end to lower the surge pressure and reduce the shock made when the piston rod reaches the stroke end. Operation Piston valve “closed“ Piston valve “open“ q The oil from the pump acts on piston (2) and piston valve (3).
Then, piston valve (3) is pushed to the right to seal the tapered part of piston valve seat (4). As a result, the oil pressure in the cylinder rises to move piston (2) to the right. q The end of piston valve (3) touches cylinder bottom (a) before piston rod (1) reaches the stroke end, and then only piston (2) continues moving. At this time, the oil which has been stopped by piston valve (3) is released through piston valve seats (4) and (5) to the bottom side, thus the oil pressure in the cylinder lowers. D65EX, PX, WX-15 11