30 Testing and adjusting SEN00585-00 Measuring engine speed 1 3. Measuring high idle speed 1) Start the engine and set the fuel control dial in the high idle position. 2) Set the PCCS lever and work equipment control lever in neutral and measure the engine speed. a The high idle speed measured in the “Monitoring mode” or in the “Pm Clinic auxiliary mode” is the auto-deceleration speed. a When measuring the high idle speed of the engine, use the “Adjustment mode”. Adjustment code: 0007 (Engine decelera- tor cut mode) a Measure the engine speed under the following condition. q Coolant temperature: Within operating range q Hydraulic oil temperature:
Within operat- ing range q Power train oil temperature: Within operat- ing range 1. Preparatory work Turn the starting switch ON and set the monitor panel in the “Monitoring mode” to prepare for measurement of the engine speed. a For the operating method, see “Special functions of monitor panel (EMMS)”. q Monitoring code: 01000 (Engine speed) 4. Measuring decelerator pedal speed 1) Start the engine and set the fuel control dial in the high idle position. 2) Set the PCCS lever and work equipment control lever in neutral, and measure the engine speed with the decelerator pedal depressed. 2. Measuring low idle speed 1) Start the engine and set the fuel control dial in the low idle position.
2) Set the PCCS lever and work equipment control lever in neutral and measure the engine speed. D65EX, PX, WX-15E0 5