Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — MEASURING EXHAUST GAS COLOR

30 Testing and adjusting SEN00585-00 Measuring exhaust gas color 1 a Measuring instrument for exhaust gas color k When installing and removing the measur- ing instrument, take care not to touch a hot part. a If an air source and a electric power source are not available in the field, use handy smoke checker C1 . When recording official data, etc., use smoke meter C2 . a Measure the exhaust gas color under the fol- lowing condition. 2) Connect the probe hose, receptacle of the accelerator switch, and air hose to smoke meter C2 . a Restrict the supplied air pressure below 1.5 MPa {15 kg/cm 2 }. 3) Connect the power cable to a receptacle of AC100V power source.

a Before connecting the cable, check that the power switch of the smoke meter is turned off. 4) Loosen the cap nut of the suction pump and fit the filter paper. a Fit the filter paper securely so that the exhaust gas will not leak. 5) Turn on the power switch of smoke meter C2 . q Coolant temperature: Within operating range 1. Measuring with handy smoke checker C1 1) Stick a sheet of filter paper to smoke checker C1 . 2) Insert the exhaust gas intake pipe in the exhaust pipe. 3) Start the engine. 4) As increasing the engine speed rapidly or running it at high idle, operate the handle of smoke checker C1 so that the filter paper will absorb the exhaust gas.

5) Remove the filter paper and compare it with the attached scale to make a judge- ment. 6) After finishing measurement, remove the measuring instrument and reinstall the removed parts. 6) Start the engine. 7) As increasing the engine speed rapidly or running it at high idle, press the accelera- tor pedal of smoke meter C2 and collect the exhaust gas with the filter paper. 8) Place the contaminated filter paper on the clean filter paper (at least 10 sheets) in the filter paper holder and read the indicated value. 9) After finishing measurement, remove the measuring instrument and reinstall the removed parts. 2.

Measuring with smoke meter C2 1) Insert probe [1] of smoke meter C2 in the outlet of the exhaust pipe and fix it to the exhaust pipe with a clip. D65EX, PX, WX-15E0 11 Symbol Part No. Part name C 1 799-201-9001 Handy smoke checker 2 Commercial item Smoke meter