Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — MEASURING POWER TRAIN OIL PRESSURE

SEN00585-00 30 Testing and adjusting Measuring power train oil pressure 1 a Measuring tools for power train oil pressure k Stop the machine on a level place, lower the work equipment to the ground, and set the parking brake lever and work equip- ment lock lever in the lock position. a Measure the power train oil pressure under the following condition. 1. Measuring brake pressure 1) Remove oil pressure pickup plug (1) and attach nipple K3 , and connect oil pressure gauge [1] of hydraulic tester K1 . a Use an oil pressure gauge of 5.9 MPa {60 kg/cm 2 }. q Power train oil temperature:

70 – 80°C a The centralized power train oil pressure pickup ports are installed inside the inspection cover (1) on the right side of the operator cab. 2) Run the engine and set the parking brake lever in free position. 3) Measure the oil pressure while the engine is running at low idle and high idle. a Check that the oil pressure lowers to 0 when the brake pedal is depressed or the parking brake lever is set in the lock position. a List of oil pressure measuring points and gauges to be used. 34 D65EX, PX, WX-15E0 Symbol Part No.

Part name K 1 799-101-5002 Hydraulic tester 790-261-1204 Digital hydraulic tester 2 799-401-2320 Hydraulic tester (0.98 MPa {10 kg/cm2}) 3 799-101-5220 Nipple (10 x1.25 mm) 07002-11023 O-ring No. Oil pressure reading Gauge (MPa {kg/cm2}) 1 Brake pressure 5.9 {60} 2 Torque converter inlet pressure 2.5 {25} 3 Torque converter outlet pressure 0.98 {10} 4 Transmission main relief pressure 5.9 {60}