SEN00585-00 30 Testing and adjusting Measuring fan pump circuit pressure 1 4. Install adapter R2 and connect hose (3) again. Install nipple R3 and connect oil pressure gauge [2]. a Use an oil pressure gauge of 39.2 MPa {400 kg/cm 2 }. a Measuring instruments for fan pump circuit pressure 1. Open the radiator mask. 2. Remove fan guard (1). 5. Run the engine, and turn the monitor panel to the adjustment mode. a For the operation method of the adjust- ment mode, see “Special functions of monitor panel (EMMS)”. a Adjustment code: 1005 (Fan 100% speed mode) 6. Measure the oil pressure of fan circuit while the engine is running at high idle. 3.
Remove cover (2) and disconnect fan motor drive circuit hose (3). 7. After finishing measurement, remove the mea- suring instrument and reinstall the removed parts. 60 D65EX, PX, WX-15E0 Symbol Part No. Part name R 1 799-101-5002 Hydraulic tester 790-261-1204 Digital hydraulic tester 2 799-401-3400 Adapter (size 05) 3 799-101-5220 Nipple (10 x 1.25 mm) 07002-11023 O-ring