SEN00586-00 30 Testing and adjusting Operation and display in service mode Method of changing to service mode a When using the service mode, change the screen by the following special operation. 1) Special operation of switches Set the monitor panel in the service mode by operating service switch (3) and buzzer cancel switch (4). a Keeping the service switch in ON position, hold the buzzer cancel switch in the [ U ] position for more than 2.5 seconds. a If the monitor panel is set in the service mode, [1C] is displayed on gear speed display section (1). a Each time the monitor panel is set in the service mode, “Maintenance interval change mode” is displayed first.
2) Selecting and executing mode to be used Select the mode to be used with information switch (5) and execute it with buzzer cancel switch (4). q [>]: Next mode No. q [ q [ U ]: Execute mode. a For details of operation in each mode, see the following pages. 3) Finishing mode and function The current mode and function can be finished by either of the following method, regardless of the current mode and hierarchy. 1] When continuing the operation in another mode or function or in the operator mode: Return to the mode screen or function screen to be used next by operating buzzer cancel switch (4). q [ t ]: Screen returns. 2] When finishing all operations: Turn off the starting switch.
10 D65EX, PX, WX-15E0 No. Gear speed display section Adjustment item 5 1C Maintenance interval change mode 6 EE Electric system failure code display mode 7 bE Mechanical system failure code display mode 8 Cb Adjustment mode 9 Ld Load saving display mode 10 5R Real-time monitoring mode 11 dR Dual display monitoring mode