Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — SPECIAL FUNCTIONS OF MONITOR PANEL (EMMS)

30 Testing and adjusting SEN00586-00 5. Maintenance interval change mode (5-EXCHG. INTVAL. SET MODE) In this mode, you can check and set the main- tenance interval times of various filters and oils which are the bases of the maintenance dis- play function in the operator mode. 2) Selecting and displaying maintenance item 1] Operate information switch (5) on the maintenance item selection screen to select a maintenance item. q [>]: Next code q [ 2] Display the maintenance item selec- tion screen by operating buzzer can- cel switch (4). 1) Selecting and implementing a mode 1] Select “Maintenance interval change mode” on the mode selection screen.

a If the mode is selected, code (1C) is displayed on gear speed display section (1) and the title is displayed on multi-information section (2). 2] Display the maintenance item selec- tion screen by operating buzzer can- cel switch (4). q [ U ]:Execute item. q [ U ]: Execute mode 3) Contents of information screen The following items are displayed on the information section. 1: Code 2: Maintenance item 3: Replacement interval (Set time) a Below figure shows an example. a If the replacement interval does not need to be changed, finish the opera- tion on this screen. a If the replacement interval needs to be changed, go to step 4). D65EX, PX, WX-15E0 11