Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — SPECIAL FUNCTIONS OF MONITOR PANEL (EMMS)

SEN00586-00 30 Testing and adjusting 2) Display in case where no codes are recorded If the failure codes which occurred in the past, and the current active failure codes do not exist, the below display will be shown. a Flashing and lighting of failure code Flashing:Code of the failure which is currently detected. Lighting: Code of the failure which is not currently detected. a Conditions for detecting and keeping failure code A failure code of the mechanical sys- tem is switched to the lighting when the problem is solved, even if the starting switch is not turned off.

4) Operations in case that multiple codes are recorded When multiple codes are recorded, they can be displayed one by one by operating information switch (5). q [>]: Go to next failure code q [ a All failure codes, including ones that did not occurred in the past, are dis- played in numerical order. 3) Display in case where 1 or more codes are recorded If any failure codes which happened in the past or which are currently active exist, the display will be as shown below. 1] : No. 2] : Failure code (Flash if currently active.) 3] : Number of occurrences up to now 4] : Elapsed time measured by service meter after first occurrence 5] :

Elapsed time measured by service meter after last occurrence a The below figure shows an example of the display. 5) Method of deleting failure code The failure codes of the mechanical sys- tem cannot be deleted. 16 D65EX, PX, WX-15E0