Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — SPECIAL FUNCTIONS OF MONITOR PANEL (EMMS)

30 Testing and adjusting SEN00586-00 a Conditions for detecting and keeping failure code When a failure is detected, the failure code other than communication related or engine-related keeps flash- ing until the starting switch is turned off. After turning the starting switch OFF temporarily, if the starting switch is turn on or the engine is started again, the failure code keeps lighting until the same trouble is detected. Communication related or engine related failure code is switched to the lighting when the problem is solved, even if the starting switch is not turned off. 7.

Mechanical system failure code display mode (7-MACHINE FAULT CODE MODE) In this mode, you can check the mechanical system failure codes among the information of the troubles that occurred on the machine. 1) Selecting and implementing a mode 1] Select “Mechanical system failure code display mode” on the mode selection screen. a If the mode is selected, code (bE) is displayed on gear speed display section (1) and the title is displayed on multi-information section (2). 2] Display the failure code display screen by operating buzzer cancel switch (4).

4) Operations in case that multiple codes are recorded When multiple codes are recorded, they can be displayed one by one by operating information switch (5). q [ U ]: Execute mode. q [ a The failure codes are displayed in the order of their first occurrence times. q [>]: Go to next failure code 5) Method of deleting failure code While displaying a failure code that is to be deleted, operate shift up switch (6) or shift down switch (7). q [Up] or [Down]: Delete failure code. a A failure code which is active cur- rently (code is flashing) cannot be deleted. D65EX, PX, WX-15E0 15