Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — SPECIAL FUNCTIONS OF MONITOR PANEL (EMMS)

30 Testing and adjusting SEN00586-00 5) Displayed information of reverse odome- ter (03) On this screen, the integrated reverse travel distance of the machine is dis- played. a The data cannot be reset. 10. Real-time monitoring mode (10-REAL TIME MONITORING MODE) In this mode, the speeds, oil pressures, tem- peratures, currents, voltages, etc. can be mon- itored by using the signals from sensors, switches, and solenoids installed to various parts of the machine. a This mode is used to monitor the items one by one. When monitoring two items simultaneously, use the “Dual display monitoring mode”.

1) Selecting and implementing a mode 1] Select the “Real time monitoring mode” on the mode selection screen. a If the mode is selected, code (5R) is displayed on gear speed display sec- tion (1) and the title is displayed on multi-information section (2). 2] Display the monitoring code input screen by operating buzzer cancel switch (4). 6) When operating machine in the load sav- ing display mode If the parking brake lever is set in the “free” position, gear speed display section (1) returns to the normal display and the machine can be operated normally.

a At this time, even if the shift up or shift down switch is pressed with the PCCS lever in the neutral position, the shift cannot be changed. (The displayed number is the code of load saving display mode.) To change the shift, shift the PCCS lever to the “forward” or “reverse” position and press the shift up or shift down switch while the machine is traveling. a To select another screen, return the parking brake lever to the “lock” posi- tion temporarily and perform the nec- essary operation. q [ U ]: Select and decide mode. D65EX, PX, WX-15E0 33