Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — SPECIAL FUNCTIONS OF MONITOR PANEL (EMMS)

SEN00586-00 30 Testing and adjusting 2) Selecting and entering monitored items 1] On the code input screen, input the 5- digits code of the item to be moni- tored by operating information switch (5), shift up switch (6), and shift down switch (7). a If the input code is not correct, the code input screen appears again after the screen shown below. q [>]: Cursor moves rightward. q [ q [UP]: Number increases. q [DOWN]: Number decreases. 3) Displayed information on monitoring screen (Below figure shows examples) 1] : Code 2] : Monitored item 3] : Information 4] : Unit (Not displayed for some items) a For the details, see the “Monitoring mode table”.

2] After inputting the code, operate buzzer cancel switch (4) to display the monitoring screen. q [ U ]: Determine input. a If the input code is correct, the monitoring screen shown below appears. 4) Function of holding monitoring information If an displayed information such as the engine speed is not stabilized and cannot be read easily in the monitoring mode, it can be held and released by operating buzzer cancel switch (4). q [ U ]: Hold and release. 34 D65EX, PX, WX-15E0