30 Testing and adjusting SEN00587-00 6. Boost pressure sensor and intake manifold temperature sensor (BOOST PRES & IMT) a Disconnecting and connecting connectors Since the connectors of boost pressure and temperature sensor have special lock mechanism, disconnect in the order of (a) – (b) and connect in the order of (c) – (d) as shown in the below figure. Disconnect: (a) release lock – (b) discon- nect connector Connect: (c) connect connector – (d) mesh lock 8.
Common rail pressure sensor (FUEL RAIL PRESS) a Disconnecting and connecting connectors Since the connector of common rail pres- sure sensor has special lock mechanism, disconnect in the order of (a) – (b) and connect in the order of (c) – (d) as shown in the below figure. Disconnect: (a) release lock – (b) discon- nect connector Connect: (c) connect connector – (d) mesh lock a Removal and installation of sensor When removing and installing boost pres- sure and intake manifold temperature sen- sor, use T type torque wrench [bearing number : T15]. 7.
Fuel supply pump IMV solenoid (FUEL REGULATOR) a Disconnecting and connecting connectors Since the connector of fuel supply pump IMV solenoid has special lock mechanism, disconnect in the order of (a) – (b) and connect in the order of (c) – (d) as shown in the below figure. Disconnect: (a) release lock – (b) discon- nect connector Connect: (c) connect connector – (d) mesh lock D65EX, PX, WX-15E0 7