SEN00588-00 40 Troubleshooting Checks before troubleshooting 1 4 D65EX, PX, WX-15E0 Check item Judgement value Action Lubricating oil, coolant 1. Check fuel level and type — Add fuel 2. Check for impurities in fuel — Clean and drain 3. Check hydraulic oil level Between H and L Add oil 4. Check oil level in damper case — Add oil 5. Check power train oil level Between H and L Add oil 6. Check engine oil level (engine oil pan level) Between H and L Add oil 7. Check coolant level (sub-tank level) Between H and L Add coolant 8. Check dust indicator for clogging No red color Clean or replace 9. Check brake pedal travel — Adjust Hydraulic and mechanical equipment 1.
Check for abnormal noise and smell — Repair 2. Check for oil leakage — Repair 3. Carry out air bleeding — Bleed air Electrical equipment 1.Check for looseness and corrosion of battery cable terminals — Retighten or replace 2. Check for looseness and corrosion of alternator harness terminals — Retighten or replace 3. Check for looseness and corrosion of starting motor harness termi- nals — Retighten or replace 4. Check battery voltage (engine stopped) 20 – 30 V Charge or replace 5. Check battery electrolyte level Between H and L Add or replace 6. Check for discoloration, burnout of wiring, and peeling of harness coating. — Repair or replace 7.
Check for missing wiring clamps and a slack of wire. — Repair 8. Check for water leaking on wiring (pay particularly careful attention to water leaking on connectors or terminals) — Dry 9. Check for blown or corroded fuse — Replace 10. Check alternator voltage (engine running at half speed or above) After running for several minutes: 27.5 – 29.5 V Replace 11. Check operating sound of battery relay (when turning starting switch ON or OFF) — Replace