SEN00588-00 40 Troubleshooting Symptom supposed to be failure and troubleshooting No. 6 D65EX, PX, WX-15E0 No. Symptom supposed to be failure Troubleshooting Code display E-mode H-mode S-mode Symptom related to action code and failure code 1 Display action code on monitor panel. Check fail- ure code. 2 Display failure code in failure code display mode. q Engine related 3 Engine is hard to start. (Engine starting always takes time.) S-1 4 Engine does not start. Engine does not crank. E-1 S-2a) 5 Engine cranks but no exhaust smoke comes out. S-2b) 6 Exhaust smoke comes out but engine does not start. S-2c) 7 Engine does not pick-up smoothly.
(Poor follow-up performance) S-3 8 Engine stops during operation. S-4 9 Engine does not rotate smoothly (hunting). S-5 10 Engine lacks in output or power. S-6 11 Exhaust smoke is black (incomplete combustion). S-7 12 Oil consumption is excessive or exhaust smoke is blue. S-8 13 Oil gets contaminated quickly. S-9 14 Fuel consumption is excessive. S-10 15 Oil mixes in coolant or coolant spurts back or coolant level goes down. S-11 16 Engine oil pressure drops. S-12 17 Oil level rises (water or fuel mixes). S-13 18 Coolant temperature rises too high. (overheat) S-14 19 Abnormal noise occurs. S-15 20 Vibration is excessive. S-16 21 Preheater does not operate.
E-2 Power train related 22 There is no travel power. (no drawbar pull) H-1 S-6 23 Machine does not travel (at 2nd or 3rd speed) H-2 24 Machine does not start at any gear speed. H-3 25 Machine travels only in one direction, forward or reverse. H-4 26 Time lag is excessive at shifting gear speed or shifting forward- reverse. H-5 27 Machine cannot be steered. (Machine does not turn leftward or rightward.) H-6 28 Steering speed or power is insufficient. H-7 29 Brake does not work. H-8 30 Power train oil overheats. H-9 31 Abnormal sound comes out around HSS and hydraulic pump or HSS motor. H-10