SEN00590-00 40 Troubleshooting Failure code[CA731] Abnormal engine Bkup speed sensor phase: Abnormal phase 1 46 D65EX, PX, WX-15E0 Action code Failure code Symptom of failure Abnormal engine Bkup speed sensor phase: Abnormal phase (Engine controller system) CALL E03 CA731 Failure content • Abnormal phase is detected from the signals of engine Ne speed sensor and engine Bkup speed sensor. Controller's action • Continues the control using engine Ne speed sensor signal. Symptoms that appears on machine • Engine can not start or engine is hard to start. • Idle speed is not stable. • Exhaust gas color becomes black. General information • Duplication of failure code: start the engine.
Possible causes and the standard values when normal Cause Standard value when normal and remarks for troubleshooting 1 Damaged engine Ne speed sensor Since a damage of engine Ne speed sensor is suspected, visually check it. 2 Damaged engine Bkup speed sensor Since a damage of engine Bkup speed sensor is suspected, visually check it. 3 Defective mounting or dam- age of speed detection ring on the crankshaft side Since a defective mounting or a damage of speed detection ring on the crankshaft side is suspected, carry out the inspection according to the following procedure. 1) Set the No.1 cylinder to the compression top dead center (align the marks).
2) If the center of the cut-out portion on the speed detection ring is aligned with the tip of Ne speed sensor, the mounting is normal. 4 Defective mounting or dam- age of speed detection gear on the camshaft side Since a defective mounting or a damage of speed detection gear on the camshaft side is suspected, carry out the inspection according to the following procedure. 1) Set the No.1 cylinder to the compression top dead center (align the marks). 2) Remove the Bkup speed sensor. 3) If you can see a groove on a side face of speed detection gear through the mounting hole of the sensor, the mounting is normal.
5 Defective timing adjustment of crankshaft and camshaft Since a defective timing adjustment of crankshaft and camshaft is suspected, inspect directly. 6 Defective connection of the ground terminal Defective connection of the ground terminal is suspected. Check the following terminals directly: • Ground terminal of the machine body (negative terminal of the battery) • Ground terminal of the engine • Ground terminal of the engine controller • Ground terminal of the starting motor