SEN00591-00 40 Troubleshooting Failure code [DAQ0KT] [DB30KT] Steering and transmission controller: Abnormality in controller 1 18 D65EX, PX, WX-15E0 Action code Failure code Symptom of failure Steering and transmission controller: Abnormality in controller (Steering and transmission controller system) E01 DAQ0KT DB30KT Failure content • Information of ROM (nonvolatile memory) of steering and transmission controller is not normal. Controller's action • Defaults internal adjustment value. Symptoms that appears on machine • Gear shift feeling of transmission may become worse. General information • Both of DAQ0KT and DB30KT are displayed. • Duplication of failure code:
turn ON the starting switch. Possible causes and the standard values when normal Cause Standard value when normal and remarks for troubleshooting 1 Defective steering and transmission controller Troubleshooting cannot be carried out since it is internal defect. • Adjust once in adjustment mode (Code 0002). (There is no problem to keep using controller unless any visible problem appears on machine.)