SEN00591-00 40 Troubleshooting Failure code [DGT1KA] Power train oil temperature sensor: Disconnection 1 Circuit diagram related to power train oil temperature sensor 54 D65EX, PX, WX-15E0 Action code Failure code Symptom of failure Power train oil temperature sensor: Disconnection (Steering and transmission controller system) E01 DGT1KA Failure content • Even though coolant temperature rises, power train oil temperature sensor signal remains to be low temperature. Controller's action • Nothing particular. Symptoms that appears on machine • Power train oil temperature on monitor panel is not displayed normally. • Fan speed is limited to half. • Gear shift shock of transmission increases.
General information • Power train oil temperature status (temperature) can be checked in monitoring mode. (Code 30100: Power train oil temperature) • Method of reproducing failure code: Turn starting switch ON or start engine. Possible causes and the standard values when normal Cause Standard value when normal and remarks for troubleshooting D 1 pe (I efective power train oil tem- rature sensor nternal disconnection) aPrepare with starting switch OFF and diagnose with starting switch still OFF. 453 (male) Resistance Between (1) – (2) 3.5 k – 90 kz (10 – 100°C) Between (1), (2) – chassis ground Min.
1 Mz Di 2 (D co sconnection in wiring harness isconnection or defective ntact of connectors) aPrepare with starting switch OFF and diagnose with starting switch still OFF. Wiring harness between S04 (female) (12) – 453 (female) (1) Resis- tance Max. 1 z Wiring harness between S03 (female) (3) (4) – 453 (female) (2) Resis- tance Max. 1 z 3 D efective monitor panel aPrepare with starting switch OFF and diagnose with starting switch still OFF. S03, S04 (female) Resistance S04 (12) – S03 (3) (4) 3.5 k – 90 kz (10 – 100°C)