40 Troubleshooting SEN00592-00 Failure code [DXH5KY] 2nd clutch ECMV: Short circuit to power source line 1 Circuit diagram related to transmission 2nd clutch ECMV D65EX, PX, WX-15E0 31 Action code Failure code Symptom of failure 2nd clutch ECMV: Short circuit to power source line (Steering and transmission controller system) CALL E0 3 DXH5KY Failure cont ent • Current flows constantly to transmission 2nd clutch solenoid circuit. Controller' action • Flashes warning lamp and turns on alarm buzzer. s • Stops outputting to transmission 2nd clutch solenoid circuit. • Limits operation of engine and transmission. Symptoms t appears on machin hat • The auto shift down function does not work.
• Once machine is stopped, engine speed is limited to medium (half). e • Once machine is stopped, travel is limited to F2 and R2. General informatio • Output state (current) to 2nd clutch solenoid can be checked in monitoring mode. (Code 31603, 31613: 2nd clutch ECMV output current value) n • Duplication of failure code: Engine start + F2 or R2 travel Possible causes and standard val when norm Cause Defective 2nd clutch ECMV.
1 (Internal disconnection and short circuit) the Hot short of wiring harness 2 ues (a contact with 24 V circuit) al Defective steering and 3 transmission controller Standard value when normal and remarks for troubleshooting aPrepare with starting switch OFF and diagnose with starting switch still OFF. 2SOL (male) Resistance Between (1) – (2) 5 – 25 z aPrepare with starting switch OFF and diagnose with starting switch ON. Between ground and wiring harness betwe ST3 (female) (16) – 2SOL (female) (1) en Voltage Ma x. 1 V aPrepare with starting switch OFF and diagnose with starting switch ON. ST3 PCCS lever Voltage Between (16) – (23) Ot F2 and R2 5 – 25 V her than F2 and R2 Max. 1 V