Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — E-6 WHILE THE ENGINE IS RUNNING, THE EMERGENCY WARNING ITEM FLASHES.

SEN00593-00 40 Troubleshooting E-6 While the engine is running, the emergency warning item flashes. 1 18 D65EX, PX, WX-15E0 Symptom of failure (1) The engine oil pressure caution lamp flashes. General information • When any abnormality is detected during engine running, the engine oil pressure caution lamp flashes and the alarm buzzer sounds. • The engine oil pressure switch signal is used to communicate with the engine controller. Possible causes and the standard values when normal Cause Standard value when normal and remarks for troubleshooting 1 Reduction of engine oil pressure (When system is normal) Check the engine oil pressure as the drop of engine oil pressure is detected.

• Carry out the troubleshooting of “S-12 The oil pressure drops.” 2 Defective engine oil pressure system When the possible cause 1 is not the real cause, the engine oil pressure switch circuit is supposed to be defective. So, carry out the troubleshooting of “Failure code [CA435] Abnormal engine oil pressure switch.” 3 Defective monitor panel Since this is an internal defect, it cannot be diagnosed. Symptom of failure (2) The coolant temperature caution lamp flashes. General information • When any abnormality is detected while engine is running, the coolant temperature caution lamp flashes and the alarm buzzer sounds.

• The coolant temperature caution lamp flashes or goes out in accordance with an indication on the engine coolant temperature gauge. • The input state (temperature) from the coolant temperature sensor can be checked in the monitoring mode. (Code 04104: Coolant temperature) Possible causes and the standard values when normal Cause Standard value when normal and remarks for troubleshooting 1 Coolant overheats (When system is normal) Since the coolant overheat is detected, check the coolant tempera- ture. (At the coolant temperature over 105°C, the lamp flashes and the buzzer sounds.

Over 102°C, just the lamp flashes.) 2 Defective coolant temperature sensor system (Engine controller circuit) When the cause 1 is not the real cause, the coolant temperature sensor circuit is supposed to be defective. So, carry out the troubleshooting of “E-8 The coolant temperature gauge does not indicate correctly.” 3 Defective monitor panel Since this is an internal defect, it cannot be diagnosed.