Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — H-8 BRAKE DOES NOT WORK

SEN00594-00 40 Troubleshooting H- 8 Brake does not work 1 10 D65EX, PX, WX-15E0 Symptom of failure • Brake does not work. General information • Check that the power train oil level is normal before troubleshooting. • Check that the transmission main relief pressure is normal before troubleshooting. (See H-1 "There is no travel power") Possible causes and the standard values when normal Cause Standard value when normal and remarks for troubleshooting 1 Defective operation of brake valve aPrepare with the starting switch OFF, and then run the engine at high idle for troubleshooting. Brake pedal Brake oil pressure When released Min. 2.55 MPa {Min.

26 kg/cm2} When depressed 0 MPa {0 kg/cm2} 2 Brake pedal linkage out of adjustment If the result of the troubleshooting in cause 1 is abnormal, the brake pedal linkage is assumed to be out of adjustment; visually check it. 3 Defective brake seal If the result of the troubleshooting in cause 1 is abnormal, the brake seal is assumed to be defective; visually check it. 4 Slip or abrasive wear of brake disc plate Slip or abrasive wear of the brake disc plate is suspected; visually check it.