Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — REMOVAL AND INSTALLATION OF CYLINDER HEAD ASSEMBLY

SEN00945-00 50 Disassembly and assembly 26. Disconnect connector (25) according to the fol- lowing procedure. 1) Slide lock (L1) to the right. 2) While pressing lock (L2), pull it toward this side to disconnect. a If part (A) does not float when lock (L2) is pressed and pulled toward this side, the connector is not disconnected. In this case, while pressing lock (L2), float part (A) with a small flat-head screwdriver and pull lock (L2) toward this side. 30. Loosen adjustment bolt (29) of the air condi- tioner compressor. 31. Loosen the mounting bolt of air conditioner compressor bracket (30). 32. Remove air conditioner compressor belt (31). [*7] 33.

Disconnect air conditioner compressor hose clamp (32). 34. Disconnect wiring harness clamp (33). 27. Remove bracket (26). 35. Disconnect connector clip (34). 36. Disconnect connector A/C (35). 37. Disconnect ground wire (36). 38. Remove air conditioner compressor and bracket (30) together. a Do not disconnect the air conditioner com- pressor hose but place it on the track shoe. 39. Disconnect muffler drain tube clamp (37). 40. Remove bracket (38). 28. Disconnect ground wire (27). 29. Remove air intake connector and tube assem- bly (28). 8 D65EX, PX, WX-15E0