Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — REMOVAL AND INSTALLATION OF CYLINDER HEAD ASSEMBLY

50 Disassembly and assembly SEN00945-00 12. Disconnect wiring harness clamp (10). 20. Disconnect coolant hose (19). [*4] a Check the connection end. 13. Disconnect terminal HT/A (11) (black). a If the terminal cover is removed from the wiring harness, the label comes off. Accordingly, tape the label. 21. Press both sides of lock (L) of fuel tube (20) to disconnect. [*5] a Check the connection end. 14. Disconnect terminals (12) (green) and (13) (black and thick). 22. Remove filter and bracket assembly (21). 23. Disconnect air hose (22). [*6] a Make marks at the hose end tube to show the original position of the hose (See the figure below). 15. Disconnect connector mounting bolt (14). 16.

Disconnect ground terminal (15) (black). a If the terminal cover is removed from the wiring harness, the label comes off. Accordingly, tape the label. In particular, if the labels of terminals HT/A (11) and ground terminal (15) come off, you cannot say which is which, since both terminals HT/A (11) and ground terminal (15) are black and coming from the same wiring harness. 24. Disconnect bracket (23). 25. Remove heater relay and plate assembly (24). 17. Disconnect wiring harness clamp (16). 18. Disconnect bracket (17). 19. Disconnect air cleaner bracket (18). D65EX, PX, WX-15E0 7