SEN00945-00 50 Disassembly and assembly Removal and installation of cylinder head assembly 1 Special tools 5. Disconnect dust indicator hose (3). Removal k Disconnect the cable from the negative (–) terminal of the battery. a Since the hose band (MIKALOR clamp) cannot be reused, use new one. See [*6]. a The fuel tube connector is new type (To discon- nect it, press its lock from both sides and pull it). See step 21. 6. Disconnect air hose (4). [*2] 7. Remove band (5). [*3] 8. Remove air cleaner assembly (6). k The internal parts of the adapters may be damaged when fuel tubes (20) and (61) are removed. Accordingly, replace the adapters with new ones.
a The wiring harness connector is new type (To disconnect it, slide the first lock and then press the second lock). See step 26. 1. Remove the engine hood assembly. For details, see “Removal of engine hood assembly”. 2. Drain the coolant. 9. Remove plate (7). 10. Remove the mounting bolts and lift off muffler assembly (8). 6 Coolant: Approx. 39 l 3. Remove cover (1). 4 Muffler assembly: 25 kg 4. Remove the air hose, tube, and bracket assembly (2). [*1] a If the MIKALOR clamp (MC) is used, do not disconnect the hose. 11. Remove bracket (9).
6 D65EX, PX, WX-15E0 Symbol Part number Part name Necessity Q’ty N/R Sketch A 1 795-799-1131 Gear t 1 3 795-799-6700 Puller t 1 4 795-799-8150 Remover q 1 8 790-331-1120 Wrench (angle) q 1