Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — REMOVAL AND INSTALLATION OF ENGINE FRONT SEAL

50 Disassembly and assembly SEN00945-00 11. Apply a lever to (A) to remove fan belt (11). Installation k Take care not to get your fingers between the tensioner and fan pulley. a FC: Fan cooler assembly 1. Wipe off foreign matter from the crankshaft flange with clean cloths. 12. Remove 4 mounting bolts (13) and crankshaft pulley and damper (12). [*3] a Make a match mark on the crankshaft pulley and front cover (since the stamp of 1.6TOP is made on the crankshaft pul- ley). a Since plastic part (P) on the inside of the engine front seal is a pilot (guide tool) for installation of the crankshaft, do not remove it from the engine front seal. 2.

Set tool A6 to engine front seal (16) from pilot (P) side. 13. Remove the 5 mounting bolts and seal carrier (14). 14. Remove dust seal (15) and engine front seal from seal carrier (14). D65EX, PX, WX-15E0 21