Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — REMOVAL AND INSTALLATION OF FAN DRIVE ASSEMBLY

SEN00946-00 50 Disassembly and assembly Removal and installation of fan drive assembly 1 7. Remove the 4 mounting bolts and lift off fan drive assembly (8), while evading the piping and frame around it. Removal 4 Fan drive assembly: 60 kg k Disconnect the cable from the negative (–) terminal of the battery. 1. Drain the hydraulic oil. 6 Hydraulic tank: 55 l 2. Remove the mounting bolts and open fan guard (1). Installation q Carry out installation in the reverse order to removal. q Refilling with oil Add oil through the oil filler to the specified level. Run the engine to circulate the oil through the system. Then, check the oil level again. 3. Remove fan guard (2). 5 Hydraulic tank:

55 l (EO10-DH) 4. Disconnect wiring connector FAR (3). 5. Remove plate (4). 6. Disconnect hoses (5), (6), and (7). 14 D65EX, PX, WX-15E0