50 Disassembly and assembly SEN00946-00 Removal and installation of fan motor assembly 1 6. Remove the 4 mounting bolts and fan motor assembly (5). [*3] Removal 1. Remove the fan drive assembly. For details, see “Removal and installation of fan drive assembly”. 2. Remove mounting bolt (1) and lock plate (2). [*1] Installation q Carry out installation in the reverse order to removal. [*1] [*2] 3 Nut (3): 132 – 157 Nm {13.5 – 16 kgm} 1. Align the mounting bolt holes on the front side and back side of lock plate (2), and then install lock plate (2) with the less adjustment amount side up and tighten nut (3). 3. Loosen nut (3). [*2] a Do not remove the nut but leave it inserted by 2 – 3 threads.
2. Tighten mounting bolt (1). 2 Mounting bolt: Liquefied adhesive (LT-2) [*3] q Wipe the fan motor shaft and fan boss to remove dirt, and then degrease them. 4. Using puller [1], disconnect fan (4) from fan motor shaft. 5. Remove nut, then remove fan (4). D65EX, PX, WX-15E0 15