50 Disassembly and assembly SEN00947-00 Disconnection and connection of power train unit assembly 1 4. Remove the mounting bolt of bracket (3). [*1] 5. Remove all the wiring harness clamps from each part and disconnect wiring harness assembly (4). Disconnection 1. Drain oil from the power train case. 6. Remove parking brake cable (5). [*2] a Do not loosen the mounting nut but remove it together with the bracket. 6 Power train case: 48 l 2. Disconnect wiring connector TM1 (1) above the HSS case. 7. Remove all the pipes and hoses from each part. [*3] a Put tags to the disconnected pipes and hoses to prevent a mistake in re-connect- ing them. 3.
Disconnect wiring connector TMV (2) on the right side of the transmission case. 8. Remove power train and lubricating oil pump assembly (6). [*4] 4 Power train and lubricating oil pump assembly: 20 kg D65EX, PX, WX-15E0 5