SEN00947-00 50 Disassembly and assembly 5) Remove thrust washer (68), No. 4 plane- tary gear (69), and bearing (70). a Pull pin (66) out of shaft (67). 18. No. 3 housing 1) Using eyebolt [9], remove housing (83). 2) Remove No. 3 piston (84). 6) Drive out shaft (71) and remove thrust washer (72), No. 3 planetary gear (73), bearing (74), and ball (75). a Take care not to lose ball (75). 19. No. 4 discs, plates, and springs 1) Remove 5 springs (85). 2) Remove 4 discs (86) and 3 plates (87). 20. No. 5 carrier and No. 4 ring gear assembly 1) Remove 4 mounting bolts (88). 2) Remove No. 5 carrier and No. 4 ring gear assembly (89). 7) Remove snap ring (76), then remove No.
4 sun gear (77) from output shaft (78). 8) Remove snap rings (79) and (80), then remove No. 5 sun gear (81) from output shaft (78). 9) Remove inner race (82) from the bearing. 24 D65EX, PX, WX-15E0