SEN00947-00 50 Disassembly and assembly 27. Tie bolts Install 3 tie bolts (12). 29. Transmission case 1) Fit the O-ring and install transmission case (11), using eyebolts [2]. 3 Tie bolt: 156.9 – 176.5 Nm {16.0 – 18.0 kgm} 28. Operation check of piston 2) Tighten 11 tie bolts (10) (to secure the transmission). Using tool D1 , check the operating condition and stroke of each piston. 3 Tie bolt: 156.9 – 176.5 Nm {16.0 – 18.0 kgm} 30. Control valve 1) Set the transmission assembly on its side. 2) Fit the O-ring and install control valve assembly (9). 3 Mounting bolt: 44.1 – 53.9 Nm {4.4 – 5.5 kgm} 36 D65EX, PX, WX-15E0 Piston Standard stroke (mm) No. 1 5 No. 2 7 No. 3 4 No. 4 4 No. 5 3