Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — DISASSEMBLY AND ASSEMBLY OF TRQFLOW TRANSMISSION ASSEMBLY

50 Disassembly and assembly SEN00947-00 8) Install snap rings (17) and (16). 9) Install No. 2 sun gear (15) and snap ring (14). 26. Front plate assembly 1) Press fit bearing (126) to front plate (125). 2) Install seal ring (127). 24. Input shaft and No. 1 carrier assembly Using eyebolt [3], sling and install input shaft and No. 1 carrier assembly (124). At this time, engage the No. 2 sun gear with the No. 1 plan- etary gear. 3) Install collar (128) to No. 1 carrier (129). 4) Using eyebolts [18], install front plate assembly (23), matching it to the guide pin and spring. 5) Press fit the inner race side of bearing (126) to input shaft (22) and install snap ring (21).

a Check that the spring is fitted to the cover securely. 25. No. 1 discs, plates, and springs 1) Install plates (33) and discs (34) alter- nately in order from the bottom. a Discs: 5 pieces, Plates: 6 pieces a Free length of spring: 69.5 mm 2) Install 5 springs (32). D65EX, PX, WX-15E0 35