SEN00948-00 50 Disassembly and assembly 4) Install sun gear (72). 5) Install bearing (98) with the push tool. a Press fit the inner race and outer race simultaneously. 5) Set hub (92) to ring gear (52) and install snap ring (50). 6) Install hub (92) to carrier assembly (64). 6) Install collar (73) and snap ring (70). 7) Install hub and carrier assembly (64) to hub (54) and tighten bolts (89). 6. Assembly of carrier assembly 1) Install bushing (91) to carrier (90). 3 Mounting bolt: 59 – 74 Nm {6 – 7.5 kgm} 2) Install bearing (69) to gear (52). Fit thrust washers (67) to top and bottom of the bearing, then set them to the carrier.
3) Install shaft (66), matching the inside of the thrust washers and bearing to the shaft hole of the carrier. a Match the roll pin hole accurately. 4) Install roll pin (65). 7. Assembly of brake assembly 1) Install stopper (56) to the hub, then install snap ring (58). 2) Install bushing (60) to hub (39). 14 D65EX, PX, WX-15E0