Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — DISASSEMBLY AND ASSEMBLY OF HSS ASSEMBLY

50 Disassembly and assembly SEN00948-00 3) Install hub (39) to hub (54) with 18 mount- ing bolts. 8) Install seal rings (27) and (53) and cage (51). a Roughly match the oil holes on the cage to the 4 oil holes on the drum. a Press fit the cage to the outer race side of the bearing. 3 Mounting bolt: 59 – 74 Nm {6 – 7.5 kgm} 4) Install bearing (57) to hub (39). 5) Install snap ring (59). 9) Install the seal ring to piston (43). 10) Install piston (43), matching the center of the spot-face (b) having the match mark (a) to the drilled hole (c) “13.5 in diameter” (on the opposite side (d) of the side hole). 6) Set brake drum (45) to hub (39). 7) Install discs (46), plates (47), and springs (48).

D65EX, PX, WX-15E0 15