Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — DISASSEMBLY AND ASSEMBLY OF HSS ASSEMBLY

SEN00948-00 50 Disassembly and assembly 11) Install spring (42). 12) Install guide bolt [14] to cage (51). 13) Install bearing (60) to cover (41). 18) Remove the bolts and nuts used to com- press the spring, then install 4 bolts (40). 8. Installation of brake and carrier assembly 1) Equalize the projection of the seal rings from the shaft on the carrier side. 2) Using tool E1 , install brake and carrier assembly (34). 14) Using eyebolts [15] and matching to the guide bolt, set cover (41). a Check that the spring is fitted securely to both of the piston and case.

15) Compressing the spring with forcing screws [17] and nuts [16], press fit the inner race side of the bearing to the hub assembly. 9. Assembly of cover assembly 1) Install valve (31) and spring (30) to the cover, then install the plug. 16) Install spacer (38) and snap ring (37). 17) Install flange (36). 16 D65EX, PX, WX-15E0