50 Disassembly and assembly SEN00948-00 3. Shaft Using eyebolts [4], remove shaft (9). 4. Ring gear, housing assembly 1) Remove holder (10). 2) Remove floating seal (16). a If it is to be used again, be careful not to damage the seal surface and keep it in a safe place. 3) Remove outer race (18). 2) Using eyebolts [5], remove ring gear and hub assembly (11). 3) Remove snap ring (12), then remove ring gear (14) from hub (13). 6. Cover assembly 1) Tighten forcing screw [6] to pull cover assembly (21) out of case (22). Then, using eyebolts [7], remove cover assem- bly (21).
a Although the cover assemblies of D65EX-15E0, D65PX-15E0 and D65WX-15E0 have different shapes, they can be removed similarly. 5. Sprocket, hub assembly 1) Fit eyebolts, pull out sprocket and hub assembly (15) with tool J2 , and remove. a Bearing (19) will come out at the same time. D65EX, PX, WX-15E0 23