Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — DISASSEMBLY AND ASSEMBLY OF FINAL DRIVE ASSEMBLY

SEN00948-00 50 Disassembly and assembly 2) Remove floating seal (16). a If it is to be used again, be careful not to damage the seal surface and keep it in a safe place. 3) Using forcing screw [8], remove spacer (20) and bearing (19) from cover. 8. Output shaft Remove output shaft (27). 9. Pinion assembly 1) Using forcing screws [11], remove cage (28). a Check the number and thickness of the shims, and keep in a safe place. 7. Gear assembly 1) Using eyebolts [9], remove gear assembly (24) from case. 2) Using puller [10], remove bearing (26) from gear assembly (25). 2) Remove pinion assembly (29). 3) Remove bearing (31) from pinion (30).

4) Remove outer race (32) and oil seal (33) from cage (28). 5) Remove outer race (34) from case. 24 D65EX, PX, WX-15E0