STARTING AND OPERATING 161 Zoom View Deactivation NOTE: If the Surround View Camera, Cargo Camera, Back Up Camera, or Forward Facing Camera is activated manually, and the vehicle is shifted into REVERSE, deactivation methods for automatic activation are assumed. The camera delay system is turned off manually through Uconnect Settings Ъ page189. When the Rear View image is being displayed, and the vehicle speed is below 8mph (13km/h) while in any gear, Zoom View is available. By pressing the “magnifying glass” icon in the upper left of the display screen, the image will zoom in to four times the standard view. Pressing the icon a second time will return the view to the standard Rear View.
The system is deactivated in the following conditions if it was activated automatically: When the vehicle is shifted out of REVERSE with camera delay turned on, the camera image will continue to be displayed for up to 10 seconds unless the vehicle speed exceeds 8mph (13km/h), the vehicle is shifted into PARK or the ignition is placed in the OFF position. There is a touchscreen button X to disable the display of the camera image. When Zoom View is selected while the vehicle is in REVERSE, then shifted to DRIVE, the camera delay view will display the standard Back Up Camera view. If the vehicle is then returned to REVERSE gear from DRIVE, the Zoom View selection will automatically resume.
NOTE: If snow, ice, mud, or any foreign substance builds up on the camera lenses, clean the lenses, rinse with water, and dry with a soft cloth. Do not cover the lenses. 4 When the vehicle is shifted out of REVERSE with camera delay turned off, the Surround View Camera mode is exited and the last known screen appears again. Shifting to NEUTRAL from any gear will maintain the selected view (Zoom or Standard) as long as the vehicle speed is below 8mph (13km/h). If a malfunction with the system has occurred, see an authorized dealer.
The system is deactivated in the following conditions if it was activated manually from the Uconnect controls menu via the Surround View Camera button, Back Up Camera button, Cargo Camera button or Forward Facing Camera button: Cargo Camera Zoom View If the vehicle is in PARK, Zoom View is available until the gear selector is placed in DRIVE or REVERSE and speeds are at or above 8mph (13km/h). When the Cargo Camera image is being displayed, and the vehicle speed is below 8mph (13km/h) while in any gear selector position, Zoom View is available. By pressing the “magnifying glass” icon in the upper left of the display screen, the image will zoom in to four times the standard view.
Pressing the icon a second time will return the view to the standard Cargo Camera display. The X button on the display is pressed NOTE: Vehicle is shifted into PARK If the vehicle is in DRIVE, NEUTRAL, or REVERSE, and speed is greater than or equal to 8mph (13km/h), Zoom View is unavailable and the icon will appear gray. Ignition is placed in the OFF position Vehicle speed is over 8mph (13km/h) for 10 seconds While in Zoom View, the guidelines will not be visible.