162 STARTING AND OPERATING When Zoom View is selected while the vehicle is in REVERSE, then shifted to DRIVE, the camera delay view will display the standard Cargo Camera view. If the vehicle is then returned to REVERSE gear from DRIVE, the Zoom View selection will automatically resume. Activation Trailer Reverse Guidance — If Equipped The Forward Facing Camera can be activated in the following ways: The Trailer Reverse Guidance feature assists the driver in backing up a trailer by providing adjustable camera views of the trailer and surrounding area. The cameras are mounted on the side mirrors and the images will be displayed side-by-side on the touchscreen.
Left and right camera images are swapped and mirrored on the touchscreen to show the equivalent area behind the vehicle as though the driver is using the side mirrors. Pressing the Forward Facing Camera button in the Controls screen or Apps menu Shifting to NEUTRAL from any gear will maintain the selected view (Zoom or Standard) as long as the vehicle is below 8mph (13km/h). Pressing the Forward Facing Camera button located in the upper left corner of the Back Up camera display Zoom View is available until the gear selector is placed in DRIVE or REVERSE and speeds are at or above 8mph (13km/h).
Once activated, the camera image will remain on as long as the vehicle speed is below 8mph (13km/h). NOTE: Deactivation Activation The Trailer Reverse Guidance feature can be activated by pressing the Trailer Reverse Guidance button on the Back Up/Cargo Camera Display. If the vehicle is in DRIVE, NEUTRAL, or REVERSE, and speed is greater than or equal to 8mph (13km/h), Zoom View is unavailable and the icon will appear gray. The Forward Facing Camera is deactivated in the following conditions: The vehicle exceeds 8mph (13km/h), except when vehicle is in 4WD Low Deactivation While in Zoom View, the dynamic centerline will not be visible. The X button on the display is pressed.
When the vehicle is shifted out of REVERSE with camera delay turned on, the camera image will continue to be displayed for up to 10 seconds unless the vehicle speed exceeds 8mph (13km/h), the vehicle is shifted into PARK or the ignition is placed in the OFF position. There is a touchscreen button X to disable the display of the camera image. Forward Facing Camera With Tire Lines — If Equipped The vehicle is shifted into PARK. The ignition is placed in the OFF position. The Forward Facing Camera displays a front view image of the road ahead, along with tire lines to guide the driver when driving on narrow roads. Tire lines can be activated/deactivated through the Uconnect Settings. NOTE:
If the vehicle is in 4WD Low, the Forward Facing Camera image will be displayed until the X button is pressed or the ignition is placed in the OFF position.