350 SERVICING AND MAINTENANCE To minimize the possibility of catalytic converter damage: WARNING! Cooling System — Drain, Flush And Refill Do not interrupt the ignition when the transmis When working near the radiator cooling fan, disconnect the fan motor lead or turn the igni tion to the OFF position. The fan is tempera ture controlled and can start at any time the ignition is in the ON position. NOTE: Some vehicles require special tools to add coolant properly. Failure to fill these systems properly could lead to severe internal engine damage. If any coolant is needed to be added to the system please contact an authorized dealer.
If the engine coolant (antifreeze) is dirty or contains visible sediment, have an authorized dealer clean and flush with Organic Additive Technology (OAT) coolant (conforming to MS.90032). Do not try to start the vehicle by pushing or towing the vehicle. sion is in gear and the vehicle is in motion. Do not idle the engine with any ignition compo nents disconnected or removed, such as when diagnostic testing, or for prolonged periods during very rough idle or malfunctioning oper ating conditions. C OOLING S YSTEM Engine Coolant Checks Check the engine coolant (antifreeze) protection every 12months (before the onset of freezing weather, where applicable).
If the engine coolant is dirty or rusty in appearance, the system should be drained, flushed and refilled with fresh coolant. Check the front of the A/C condenser or radiator for any accumulation of bugs, leaves, etc. If dirty, clean by gently spraying water from a garden hose vertically down the face of the A/C condenser or the back of the radiator core. For the proper maintenance intervals Ъ page324. Selection Of Coolant WARNING! You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool.
Never open a cooling system pressure cap when the radi ator or coolant bottle is hot. For further information Ъ page399. NOTE: Mixing of engine coolant (antifreeze) other than specified Organic Additive Technology (OAT) engine coolant, may result in engine damage and may decrease corrosion protection. OAT engine coolant is different and should not be mixed with Hybrid Organic Additive Technology (HOAT) engine coolant or any “globally compat ible” coolant.
If a non-OAT engine coolant is introduced into the cooling system in an emer gency, the cooling system will need to be Check the engine cooling system hoses for brittle rubber, cracking, tears, cuts and tightness of the connection at the coolant recovery bottle and radiator. Inspect the entire system for leaks. Keep hands, tools, clothing, and jewelry away from the radiator cooling fan when the hood is raised. The fan starts automatically and may start at any time, whether the engine is running or not. DO NOT REMOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT. (Continued)