FCA 2022 Chassis Cab — Tire Markings

SERVICING AND MAINTENANCE 371 2. Rotate the bulb socket a quarter turn and pull it from the lamp assembly. Tire Markings NOTE: P (Passenger) — Metric tire sizing is based on US design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Example: P215/65R15 95H. European — Metric tire sizing is based on Euro­ pean design standards. Tires designed to this standard have the tire size molded into the side­ wall beginning with the section width. The letter "P" is absent from this tire size designation. Example: 215/65R15 96H.

Removing Bulb Socket From Clearance Lamp Tire Markings LT (Light Truck) — Metric tire sizing is based on US design standards. The size designation for LT-Metric tires is the same as for P-Metric tires except for the letters “LT” that are molded into the sidewall preceding the size designation. Example: LT235/85R16. 3. Pull the bulb straight from it's socket and replace. 1 — US DOT Safety Standards Code (TIN) 2 — Size Designation 3 — Service Description 4 — Maximum Load 5 — Maximum Pressure 6 — Treadwear, Traction and Temperature Grades TIRES T IRE S AFETY I NFORMATION Temporary spare tires are designed for tempo­ rary emergency use only.

Temporary high pres­ sure compact spare tires have the letter “T” or “S” molded into the sidewall preceding the size designation. Example: T145/80D18 103M. Tire safety information will cover aspects of the following information: Tire Markings, Tire Identification Numbers, Tire Terminology and Definitions, Tire Pressures, and Tire Loading. 8 High flotation tire sizing is based on US design standards and it begins with the tire diameter molded into the sidewall. Example: 31x10.5 R15 LT.