FCA 2022 Chassis Cab — Special Care

SERVICING AND MAINTENANCE 389 What Causes Corrosion? P RESERVING T HE B ODYWORK Special Care Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle. Washing If you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month. The most common causes are: Wash your vehicle regularly. Always wash your vehicle in the shade using Mopar® Car Wash, or a mild car wash soap, and rinse the panels completely with water. It is important that the drain holes in the lower edges of the doors, rocker panels, and trunk be kept clear and open. Road salt, dirt and moisture accumulation. Stone and gravel impact.

Insects, tree sap and tar. Salt in the air near seacoast localities. If insects, tar, or other similar deposits have accumulated on your vehicle, use Mopar® Super Kleen Bug and Tar Remover to remove. If you detect any stone chips or scratches in the paint, touch them up immediately. Atmospheric fallout/industrial pollutants. B ODY A ND U NDERBODY M AINTENANCE Use a high quality cleaner wax, such as Mopar® Cleaner Wax to remove road film, stains and to protect your paint finish. Use precautions to not scratch the paint. If your vehicle is damaged due to a collision or similar cause that destroys the paint and protec­ tive coating, have your vehicle repaired as soon as possible.

Cleaning Headlights Your vehicle is equipped with plastic headlights and fog lights that are lighter and less susceptible to stone breakage than glass headlights. Avoid using abrasive compounds and power buffing that may diminish the gloss or thin out the paint finish. If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials are well packaged and sealed. Plastic is not as scratch resistant as glass and therefore different lens cleaning procedures must be followed. CAUTION!­ If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel.

To minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. To remove road dirt, wash with a mild soap solution followed by rinsing. Do not use abrasive or strong cleaning mate­ rials such as steel wool or scouring powder that will scratch metal and painted surfaces. Use Mopar® Touch Up Paint on scratches as soon as possible. An authorized dealer has touch up paint to match the color of your vehicle. 8 Do not use abrasive cleaning components, solvents, steel wool or other aggressive material to clean the lenses. Use of power washers exceeding 1,200 psi (8, 274 kPa) can result in damage or removal of paint and decals.