CLAAS LEXION 500 series (520, 570) — Module A66 - GPS pilot module (GPB)

TIC LEXION 500 Electric System Description of function: Adjustment motor circuit A CAN bus signal is transmitted to the sieve adjustment module A25 by the +/- pushbuttons (T19/T26) provided that the function pre-selection rotary switch (T11) is set to a sieve position. The sieve adjustment module A25 actuates the corresponding relay K41 (K43) or K42 (K44) on pin 86. The respective sieve adjustment electric motor (M12/M23) is supplied with earth according to the sense of rotation by one of the relays K41/K42 (K43/K44) from pin 87a whereas the other relay K42/K41 (K44/K43) controls the voltage on pin 87.

The sieve adjustment module (A25) ensures actuation of the relays K41 (K43) and K42 (K44) during automatic crop selection. Sieve position display The sieve adjustment module (A25) converts the analogue signal from potentiometers provided in the positioning motors (R37/R38) into a digital signal which is displayed on terminal (A30) via the CAN bus. 03/05 Lex-e-11a 11a-3