CLAAS LEXION 500 series (520, 570) — 24a - AUTOCONTOUR (CAC)

TIC LEXION 500 Electric System Description of function: AUTOCONTOUR System (CAC) The AUTOCONTOUR (CAC) function includes automatic cutterbar guiding, reel control and cutting table adjustment (VARIO), depending on the respective machine equipment. The pushbuttons (S38c/d) activate the function cutting height preselection or cutting height control in the AUTOCONTOUR module (A8). Now the relevant solenoid coils of the individual functions are actuated by the modules A8, A16 and A27 until the actual values of the respective sensors agree with the setpoints.

Influence on control system - Setting of drop rate (Hydraulic system, chapter 3.2) - Setting of spring pre-stress (Hydraulic system, chapter 3.2) - Setting of CAC sensitivity (Terminal A30 = Cebis) - Learning of limit stops (Terminal A30 = Cebis) - Storing the work positions (Terminal A30 = Cebis) 03/05 Lex-e-24a 24a-3