Key to diagram: Coordinates A35 Montana control unit module .............................................. 7-i-18 B91 Axle angle sensor, left ........................................................ 7-j-20 B92 Axle angle sensor, right ...................................................... 7-j-16 B93 Cutting angle sensor.......................................................... 7-e-17 B94 Montana cross levelling sensor ......................................... 8-e-16 B126-1 Axle control system inclination sensor 1 B126-2 Axle control system inclination sensor 2 K66 Montana relay....................................................................
3-h-20 S93 Parking brake switch.......................................................... 4-h-17 XEa Montana feed rake conveyor connector ............................ 5-g-17 Y110 Raise cutting angle solenoid coil ........................................ 7-f-16 Y111 Lower cutting angle solenoid coil........................................ 7-f-16 Y112 Rotate front attachment to the right solenoid coil............... 7-f-16 Y113 Rotate front attachment to the left solenoid coil ................. 7-f-16 Y114 Lower axle on left-hand side solenoid coil......................... 7-h-18 Y115 Raise axle on right-hand side solenoid coil .......................
7-h-18 Y116 Lower axle on right-hand side solenoid coil....................... 7-h-18 Y117 Raise axle on right-hand side solenoid coil ....................... 7-h-18 Y118 Oil quantity increase solenoid coil ..................................... 7-h-18 Solenoid coil 3.8 A 3.2 Ω See lettering Measured value table: Item Component Measured value Remark Sensor 12 V 0.25 V – 4.75 V (Pin 1-2) (Pin 1-3) B91 B92 B93 B94 Y110 Y111 Y112 Y113 Y114 Y115 Y116 Y117 Y118 Electric System LEXION Montana 570-520 TIC 41s-2 Lex-e-41s 03/05 41s Axle control system, front attachment control system, Montana 570-520 - with integrated MONTANA control unit (up to serial no.
582 00051, 581 00026; 580 00028) Item Component Measured value Remark B91 B92 B93 B94 Sensor 12 V 0.25 V – 4.75 V (Pin 1-2) (Pin 1-3) Y110 Y111 Y112 Y113 Y114 Y115 Y116 Y117 Y118 Solenoid coil 3.8 A 3.2 Ω See lettering