Key to diagram: Coordinates A42 MONTANA GEN II module .............................................3-h-17 A45 Ground drive hydraulic motor brake restrictor module (HBM)..................................................................
4-i-20 E35c Instrument lighting...........................................................3-g-17 H60 1 st gear signal light..........................................................3-g-17 H61 2 nd gear signal light .........................................................3-g-17 S90 Gearshift control switch...................................................3-g-17 S92 Hydraulic motor fast/slow switch.....................................3-g-17 S93 Parking brake switch.......................................................3-g-17 S94 Differential lock switch .....................................................5-f-19 Y105 Differential lock solenoid coil ..........................................7-h-18 Y106 Parking brake solenoid coil.............................................7-h-18 Y107 Gearbox shift 1 st gear solenoid coil.................................7-h-18 Y108 Gearbox shift 2 nd gear solenoid coil................................7-h-18 Y121 Uphill shifting aid solenoid coil........................................7-h-18 Y122 Downhill shifting aid solenoid coil ...................................7-h-18 Y124 Ground drive brake restrictor solenoid coil .....................7-h-18 Y125 Ground drive control pressure solenoid coil ...................3-q-19 Y144 Hydraulic motor solenoid coil .........................................7-h-18 Z57 Ground speed control lever neutral position actual value switch - safety start switch..........................3-g-18 Z82 1 st gear actual value switch (actual value)......................8-g-19 Z83 2 nd gear actual value switch (actual value) .....................8-g-19 Z12 Note:
The link (Z12) does not describe any real parking brake actual value switch such as that provided on a standard machine. On MONTANA machines, the required signal from the parking brake is read in at the same time by switch (S93). Measured value table: Item Component Measured value Remark Solenoid coil 3.8 A 3.2 Ω Solenoid coil 0.75 A 16 Ω Y121 Y122 Y124 Y144 Y105 Y106 Y107 Y108 Y125 Electric System LEXION Montana 570-520 TIC 42t-2 Lex-e-42t 42t Ground drive and brake control, Montana 570-520 - with integrated MONTANA control unit (from serial no.
581 00027 to 581 00037) Item Component Measured value Remark Y121 Y122 Y124 Y144 Solenoid coil 3.8 A 3.2 Ω Y105 Y106 Y107 Y108 Y125 Solenoid coil 0.75 A 16 Ω