OM4048 1/08 Lubrication & Service - Section 40 Page 40-13 500 HOUR LUBRICATION AND MAINTENANCE CHECKS (Continued) 10. 11. 12. 13. 14. Truck Serial Number Site Unit Number Date ______________________ _______________ _______________ Hourmeter Name of Service Technician _____________ ___________________________________ TASK COMMENTS CHECKED INITIALS WHEEL MOTOR OIL SAMPLING - Refer to Section G5, Wheel Motor, for oil sampling information. WHEEL MOTOR OIL (Initial 500 hours only) - Change or filter wheel motor gear oil only after initial 500 hours or operation. Wheel motor gear oil must be filtered or changed every 2500 hours of operation thereafter.
VHMS DATA DOWNLOAD - Using a laptop PC with the VHMS Technical Analysis Tool Box program, per- form a data download from the VHMS controller. Send the data to WebCARE using the FTP feature. Refer to Section D in the shop manual for more detailed instructions. FRONT BRAKE DISC - Measure the thickness of the disc. If 20 to 25% of the disc wear surface is worn below 28.7 (1.13 in.), the disc must be replaced. Refer to the shop manual, Parking Brake, Section J, for additional information. FRONT WHEELS - Take an oil sample of the front wheel bearing oil. Refer to Section G in this shop manual for detailed instructions.