Komatsu — Multi-Function Turn Signal Switch

Operator Cab And Controls - Section 32 OM3242 Page 32-2 STEERING WHEEL AND CONTROLS Steering wheel (1, Figure 32-2) can be telescoped "in" and "out" and the lilt angle can be adjusted to provide a comfortable steering wheel position for most operators. Multi-Function Turn Signal Switch Horn Button Horn (2, Figure 32-2) is actuated by pushing the but- ton in the center of the steering wheel. Ensure that the horn operates before moving the truck. Observe all local safety rules regarding the use of the horn as a warning signal device before starting the engine and moving the vehicle.

Multi-function turn signal switch (4, Figure 32-2) is used to activate the turn signal lights, the windshield wipers, and to select either high or low beam head- lights. Turn Signal Operation Move the lever upward to signal a right turn. Tilt / Telescope Lever An indicator in the top, center of the instrument panel will illuminate to indicate turn direction selected. Refer to Instrument Panel and Indicator Lights in this section. The steering column can be telescoped or the wheel tilted with lever (3, Figure 32-2). Adjust the tilt of the steering wheel by pulling the le- ver toward the steering wheel and moving the wheel to the desired angle.

Releasing the lever will lock the wheel in the desired location. Move the lever downward to signal a left turn. Adjust the telescope function by pushing the lever forward to unlock. After positioning as desired, release the lever to the lock position. NOTE: The turn signal does not automatically cancel after the turn has been completed. High Beam Headlight Operation Pulling the lever inward (toward the rear of the cab) changes the headlights to high beam. When the high beams are selected, the indicator in the top center of the instrument panel will illuminate. Moving the switch back to the original position will return the headlights to low beam.

Windshield Wiper Operation Windshield Wipers OFF Intermittent - Long Delay Intermittent -Medium Delay Intermittent -Short Delay Low Speed FIGURE 32-2. STEERING WHEEL & CONTROLS High Speed 1. Steering Wheel 2. Horn Button 3. Tilt/Telescope Lever 4. Multi-Function Turn Signal Switch Depressing the button at the end of the lever will activate the windshield washer.